Vivotek FD8173-H User Manual page 175

7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME
mode
sir
daymodebegintime
daymodeendtime
enableextled
bwmode
sensitivity
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
saturationpercent
contrast
sharpness
sharpnesspercent
VALUE DEFAULT
auto, auto
day,
night,
di,
schedule
<boolean> 0
00:00~23:59 07:00
00:00~23:59 18:00
<boolean> 0
<boolean> 1
low, normal
normal,
high
VALUE DEFAULT
-5~5 -5
-5~5,100 0
0~100 50
-5 ~ 5 0
-3~3,100 0
0~100 50
SECURITY DESCRIPTION
(get/set)
6/6 Set IR cut control mode
4/4 Enable/disable Smart IR
6/6 Day mode begin time
6/6 Day mod end time
1/6 Enable/disable external IR led
(capability.extir > 0)
6/6 Switch to B/W in night mode if
enabled
6/6 Sensitivity of light sensor
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image according
to mode settings.
4/4 Adjust saturation of image according
to mode settings.
100 for saturation percentage mode.
4/4 Adjust saturation value of percentage
when saturation=100
4/4 Adjust contrast of image according to
mode settings.
4/4 Adjust sharpness of image according
to mode settings.
4/4 Adjust sharpness value of percentage
when sharpness=100
VIVOTEK
User's Manual - 175