Automatic Cut-Off; Location Of Controls - Comfort Glow ES4215 Installation Instructions And Homeowner's Manual

Location of Controls

. The MAIN POWER switch is located under the control panel on the Blower/Heater panel.
1
2. Thermostat control knob - Adjust to maintain room temperature
(Cycles between 750 and 1500W)
3. Flame dimmer control - Adjust to set flame intensity
4. Fan switch - Use alone for cool air or with heat settings
5. Heat switch – One switch for low heat setting (750 Watts)
6. Heat Switch - Two switches for high heat setting (1500 Watts)
7. Lamp switch - Switches flame effect on/off.
A cut-off switch is fitted to the heating element to prevent damage due to overheating. If it cuts-off due to an
obstruction in the airflow, the heater must be allowed to cool for 15 minutes and the obstruction must be
removed before restarting.
CONTROLS
2 4 5

AUTOMATIC CUT-OFF

~ 7 ~
6 7 3
1