Cleaning And Care - Miele KFN 37432 iD Operating And Installation Instructions

Make sure that water cannot get into
the electronic unit or into the lighting
or the metal discs (contacts) in the
left-hand shelf supports.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service call.
Cleaning agents
To avoid damaging the surface of your
appliance, do not use
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,

Cleaning and care

– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
Treat stainless steel surfaces with
Miele stainless steel conditioning
agent (see "Guide to the appliance -
Optional accessories").
Unlike stainless steel cleaning
agents, the conditioning agent does
not contain any abrasive substances
and will gently remove soiling. Each
time it is used, it forms a water and
dirt repellent protective coating.
We recommend using lukewarm water
with a little washing-up liquid for
cleaning the appliance.
See the following pages for important
information regarding cleaning.
49