Dynamic Cooling - Miele KFN 37432 iD Operating And Installation Instructions

Using Super cool, Super freeze and Dynamic cooling

Dynamic cooling

When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Storing food in the refrigerator").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal.
Dynamic cooling should also be
selected when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
Switching on Dynamic cooling
^ Touch the sensor for the refrigerator
section.
The symbol for the refrigerator
section is highlighted in yellow.
30
^ Touch the Dynamic cooling sensor so
that it lights up yellow.
The fan will now run continuously.
Switching off Dynamic cooling
^ Touch the sensor for the refrigerator
section.
The symbol for the refrigerator
section is highlighted in yellow.
^ Touch the Dynamic cooling sensor so
that it is no longer lit up yellow.
The fan will now not run continuously.
It will switch on automatically when
the compressor switches on.
To save energy, the fan switches off
automatically whilst the door is open.