Connecting the sub-woofer to a surround decoder
Switch / adjustor settings
No. Purpose
Automatic power-on
Control signal
Filter
The settings of the switches / adjustors
can be changed as required.
The Cinch lead carrying the SUB OUT signal from the
surround decoder is connected to one of the sub-
woofer's CINCH IN sockets
Since the SUB OUT signal is filtered in the decoder, the
Filter switch
must be set to the 'OFF' position.
Use without control voltage:
The automatic power-on circuit is triggered by the
SUB OUT signal.
Use with control voltage (optional):
If the surround decoder features a control voltage output,
this control voltage is passed to the DIN IN socket
an adaptor lead. This triggers the automatic power-on
circuit.
The DD 1210 R and DD 1510 R surround decoders
supply a control voltage at the 5.1 OUTPUT socket.
Wiring diagram 3
No
Control
control
voltage
voltage
present
AUTO
AUTO
CTRL
OFF
OFF
,
,
and
.
via
Connecting the sub-woofer to the
surround receiver
Switch / adjustor settings
No. Purpose
Automatic power-on
Control signal
Filter
The settings of the switches / adjustors
can be changed as required.
The sub-woofer output signal (SUBW) from the K6 is
passed to the DIN-IN socket
adaptor and the SC
LINK
Since the SUBW signal is filtered in the K6, the Filter
switch
must be set to the 'OFF' position.
The control signal is present at the CONTROL socket of
the K6. It reaches the DIN IN socket
route, and triggers the automatic power-on circuit.
21
K6 DVD
Wiring diagram 4
Control voltage
present
AUTO
CTRL
OFF
,
,
and
on the K6 via the AKS6
lead.
by the same