Installation - EAW VR61 Instruction Manual

3. INSTALLATION

Unpacking and Inspection
Visually inspect the outside of the shipping carton and check for any damage. After
unpacking, if you find concealed damage to the loudspeaker, save the packing materials for
the carrier's inspection, notify the carrier immediately, and file a shipping damage claim.
Although EAW Commercial will help in any way possible, it is always the responsibility of
the receiving party to file any shipping damage claim. The carrier will help prepare and file
this claim.
Mounting Precautions
The mounting bracket provided can be
used for wall mounting the loudspeaker.
WARNING: Installation should
only be done by an experienced
technician. Improper installation
may result in damage to the
equipment, injury or death.
Make sure that the loudspeaker
is installed in a stable and
secure way in order to avoid any
conditions that may be dangerous
for persons or structures:
• Check to make sure that the support surface (e.g., wall, etc.) has the necessary
mechanical characteristics to support the weight of the loudspeaker without the
danger of it falling.
• Always use support elements suitable for the material of the wall that will support
the loudspeaker (e.g., screw anchors for bricks, screw anchors for cement, etc.). Due
to various construction methods and materials used today, the hardware for securing
the bracket to the mounting surface is not supplied. Consult a building professional
for the proper mounting hardware before mounting the bracket.
• Before suspending the loudspeaker, carefully check all the components to be used to
make sure there is no damage, deformation, corrosion and/or missing or damaged
parts that could reduce the safety of the installation.
• Consult a professional rigger or structural engineer prior to suspending loudspeakers
from a structure not intended for that use. Always know the working load limit of the
structure supporting the loudspeaker. Always make sure that the rigging hardware
minimum rating is at least five times the actual load.
• Avoid installing the loudspeaker in places exposed to harsh weather conditions.
1/4 INCH LOCK
WASHER
2 PLACES
2 PLACES
REMOVE SCREWS
FROM BOTH SIDES
VR61 and VR62 –
5