Adjustment - JVC KW-XC55 Service Manual

QQ
3 7 63 1515 0
4.1 Adjustment method
Test instruments required for adjustment
(1) Digital oscilloscope (100MHz)
(2) Frequency counter meter
(3) Electric voltmeter
(4) Wow & flutter meter
(5) Test tapes
• VT724...........................For DOLBY level measurement
• VT739..............For playback frequency measurement
• VT712....For wow flutter & tape speed measurement
• VT703........................For head azimuth measurement
(6) Torque gauge............................Cassette type for CTG-N
(7) Laser power meter(Reader:LP800102)
(8) Prove for MD (Reader:LP8010-02)
(9) Pre masterd disc (TGYS-1)
(10)Test disc (JVC:CTS1000)
Measuring conditions (Amplifier section)
• Power supply voltage.............. DC14.4V (11V to 16V allowance)
• Load impedance............ 4Ω (4Ω to 8Ω allowance)
• Line out level/Impedance..............1.0V/20k load (250 nWb/m)
Frequency band
TE
L 13942296513
FM 87.5 MHz to 108.0MHz
Band
AM 531 kHz to 1602 kHz
www
.
http://www.xiaoyu163.com

ADJUSTMENT

(Mechanism adjustment)
x ao u163
y
i
http://www.xiaoyu163.com
2 9
SECTION 4 8
Standard volume position
Balance and Bass, Treble volume, Fader : Center (Indication "0")
Loudness, Dolby NR, Sound, Cruise : Off
Volume position is about 2V at speaker output with following
conditions, Playback the test tape VT721.
AM mode
FM mono mode
FM stereo mode
Output level
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
999kHz/62dB, INT/400Hz, 30%
modulation signal on receiving.
97.9MHz/66dB, INT/400Hz, 22.5kHz
deviation pilot off mono
1kHz, 67.5kHz dev. pilot 7.5kHz dev.
0dB (1µV,50Ω/open terminal)
0 5 8 2 9 9 4 2 8
m
(No.49784)1-23
9 9
9 9