Pioneer DVR-230-AV Service Manual page 64

1
[How to Confirm the ID Number]
1 Press ESC + STEREO keys sequentially with an ID number
A
already set, and the unit enters the ID number confirmation
mode.
2
The set ID number is displayed on the screen (and on the FL
display), permitting you to confirm it.
3
To exit this mode, press CLEAR key.
[Recorder's ID Number Setting]
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
2
Compare
> * * * * * * * * *
B
<CLEAR> Exit
3
<STEREO> ID Data Setting Mode
Input ID Number !
[How to Clear the ID Number]
1 Press ESC + STEREO keys sequentially with an ID number
already set, and the unit enters the ID number confirmation
mode.
2
Input the same number as the ID number you have set.
C
[Recorder's ID Number Setting]
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
Compare
> * * * * * * * * *
2
<CLEAR> Exit
<STEREO> ID Data Setting Mode
Input ID Number !
D
3 After inputting the number, press STOP key.
Only when the entered number matches the set ID number, the
ID number is cleared and the unit exits this mode.
If the numbers do not match, you must return to step 2.
( STOP key is not accepted until 9 digits are entered.)
[Recorder's ID Number Setting]
ID Number ?
[ 0 0 0 0 0 0 0 0 1]
Compare
> 0 0 0 0 0 0 0 0 1 OK ?
E
<PLAY> Enter
3 <STOP> Memory Clear
<STEREO> ID Data Setting Mode
Input ID Number !
F
64
1
2
DVR-230-S
2
3
3
4
4