Pioneer DVR-230-AV Service Manual page 61

Hide thumbs Also See for DVR-230-AV:
Table of Contents

Advertisement

5
2. SERIAL DOWNLOAD
[Purposes]
1. When the main board is replaced, the firmware versions for the system control computer, drive, and the TUFL
microcomputer do not match, and operations of the unit may be destabilized. In such a case, the versions for the
above three must be matched.
2. This method is used when disc downloading fails.
[Tools to be used]
• PC with serial port
• RS-232C cross cable
• RS-232C I/F jig (GGF1348)
• 7P FFC (VDA1681)
• Download program (Image Updater) (*)
• Firmware
(*) This program must be installed in advance.
[Install Procedures of the Download Program]
1 Expand the compressed data of SLoader zip.
2 The folder of Image Tools is created, and then double-click on Setup. Exe of that file.
3 When the selection screen of the driver is appeared, search from C drive as the driver is installed by default for
windows 2000/XP.)
4 When the installation is finished, confirm that the Image Updater can select as
[start]
[Program]
[Download Procedures]
1 Connect the 232C I/F jigs above way.
2 Connect the FFC cable of the download jig to CN1402 of MAIN ASSY
and the power cable to the unit.
3 Turn on the PC and set the communication baud rate of 232C to 115, 200 bps.
4 Initiate the Image Updater by selecting
[Start]
[Program]
5 When the Image updater is initiated, select the port to the connecting port (COM1, etc).
6 Click [⋅⋅⋅] of the "Main Board" line on the extream right, and select the download program "DVR_231M.***file".
7 After selecting the download program, push the "Start" button.
8 When the status screen is displayed, turn the DVD recorder on. The writing of the firmware begins. (It's takes
about 5 minutes for updating the firmware.)
9 After finishing the update, push "OK" button, and then finish the Image Updater by pushing "Stop" button.
0 Unplug the power cable first, and then the FFC cable. (Be sure to keep this order.)
5
6
[Connection]
[EMMA2RL Turnkey Image Tools]
[EMMA2RL Turnkey Image Tools]
6
7
Connect as follows:
PC
RS-232C I/F
RS-232C cable
[Image Updater].
[Image Updater].
DVR-230-S
7
8
A
This unit
B
7P FFC
C
D
E
F
61
8

Advertisement

Table of Contents
loading

Table of Contents