Power Connection; Using Side Usb Input; Usb Memory Connection; Connecting The Lcd Tv To A Pc - Sanyo LCD TV Owner's Manual

Anti-theft Protection
Your Tv has an anti-theft lock hole for theft
protection.
You can use an optional lock to physically fi x the TV
when using in a public place or at home.
The anti-theft lock should be purchased separately
if desired. The locking method might be different
depending on the type of the lock purchased. Please
refer to the lock's instruction manual for proper use.

Power Connection

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• Plug the power cable to the mains socket outlet.

Using Side USB Input

• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, video and MP3
USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your fi les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.
• Do not pull out USB module while playing a fi le.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW
01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 8 01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832.indd 8
fi les stored in a
USB MEMORY
English - 8 -

USB Memory Connection

• Plug your USB device to the USB input of the TV.
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported.

Connecting the LCD TV to a PC

For displaying your computer's screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
• When the connection is made, switch to PC source.
See "Input selection" section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix
parts.

Connecting to a DVD Player

If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player's instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
"Input Selection" section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, "Input selection" section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
27.02.2010 13:55:53 27.02.2010 13:55:53