Introducing New Hand Transmitters - Waeco MagicSafe MS650 Installation And Operating Manual

MS-650.qxd 13/08/03
The magic safe MS-650 system can accommodate up to 3 hand
transmitters. To use a new hand transmitter with your system it is simply
necessary to introduce the transmitter to the system as follows:
(Example: Press the access switch the same number 4 times
(Example: Press the access switch the same number 5 times
The system will give two short acknowledging tones of the
Press the blue button of the hand transmitter.
The system will give a short acknowledging tone to confirm
Press the access switch or wait approx. 15 sec.
A double tone indicates the normal mode again.
12:58
Introducing a new hand transmitter
Switch the ignition on.
Input the first number of the pin-code
with PIN Code 45).
Switch the ignition off and then on again.
Input the second number of the pin-code.
with PIN Code 45).
Switch the ignition off and then on again.
siren to confirm it has
entered learn mode.
that the hand transmitter is introduced.
Switch the ignition off.
for to leave the learn mode.
Page 61
61 61