Installation This appliance must be installed by an authorised person in accordance with this instruction manual, AS/NZS 5601.1 – Gas installations (installation and pipe sizing), local gas fitting regulations, local electrical regulations, Building Code of Australia and any other government authority.
Front and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. ! The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations.
Connecting a flexible jointless stainless steel pipe to a Checking the tightness of the connection threaded attachment ! When the installation process is complete, check the Suitable for connection with a flexible hose assembly. The flexible hose pipe fittings for leaks using a soapy solution. Never use a assembly must be certified to AS/NZS 1869 class B or D, be of flame.
Description of the appliance Overall view Support Grid for GAS BURNERS COOKWARE Control Knobs for GAS BURNERS Support Grid for GAS BURNERS COOKWARE Control Knobs for GAS BURNERS SAFETY Ignition for DEVICES GAS BURNERS ! The rear grids stand a chance of being incorrectly ! The largest slot should be inserted into the ignition.
Start-up and use Practical advice on using the burners ! The position of the corresponding gas burner or electric hotplate* is shown on every knob. To ensure the burners operate efficiently: • Use appropriate cookware for each burner (see Gas burners table) so that the flames do not extend beyond Each burner can be adjusted to one of the following the bottom of the cookware.
Precautions and tips ! This appliance has been designed and • In case of malfunction, under no circumstances manufactured in compliance with international safety should you attempt to repair the appliance standards. The following warnings are provided for yourself. Repairs carried out by inexperienced safety reasons and must be read carefully.
Maintenance and care Switching the appliance off fights diry buildup. This also protects Disconnect your appliance from the electricity the surface from supply before carrying out any work on it. damage caused by food with a high sugar content. Do Cleaning the appliance not use abrasive sponges or cleaning...
Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.
Need help?
Do you have a question about the TG 644 P GH and is the answer not in the manual?
Questions and answers