Datalogic PowerScan M8300 Readers Quick Reference Manual page 17

6.
four digits from the Numeric Table for the PowerScan
All readers used in the same area must have different addresses.
7.
four digits from the Numeric Table in the range 0000 to 1999
8.
four digits from the Numeric Table in the range 0000 to 1999
9.
END of procedure. YOUR READER IS NOW READY TO READ CODES.
Quick Reference Guide
Set First STAR-System™ Address
Set Last STAR-System™ Address
Whenever the system is composed of a single base station, the first
and last base station addresses (steps 7 and 8) must have the same
value.
Exit and Save Configuration
PowerScan™ M8300 Configuration
Set Radio Address
ÌRF8Î
+
(from 0000 to 1999).
ÌRSRÎ
+
ÌRTTÎ
+
Ì$-?Î
™
M8300 Address
13