Table of Contents
Advertisement
11
Position of the needle to the needle hole
.04.08
Requirement
1.
Crosswise to the sewing direction, the needle should penetrate in the centre of the
needle hole.
2.
When the needle bar is positioned at b.d.c., there should be a distance of
Between the needle and the front edge of the needle hole.
Fig. 11 - 08
●
Align the needle bar frame (screws
●
Adjust the needle bar (screw
62-028
1
1, 2 and 3) in accordance with requirement 1.
3) in accordance with requirement 2.
Adjustment
3
2
0.8 mm
3
31
Advertisement
Table of Contents
