Table of Contents
Advertisement
Using the Gryphon D432/412Plus
or elements (mil size) should be read farther from the unit. (See "Technical Features" starting on
119
page
Normal Operation
Gryphon D432/D412Plus normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger partially to enable the aiming system. Then,
pull it completely to capture and decode the image. The reader will repeatedly flash until the
symbol is decoded or timeout is reached. In between the flashes of the reader, the aiming system
keeps on showing the field of view on the target (see Figure 4 on page
As you are reading code symbols, adjust the distance at which you are holding the reader.
The Gryphon D432/D412Plus hand-held reader aiming system is designed for general reading and decoding of 1D and 2D
symbols. Some variation in reading distance will occur due to narrow bar width and other factors.
If reading codes positioned on reflective surfaces, it may be necessary to tilt the reader with respect to the barcode.
14
for further details).
13
).
Gryphon™ D432/D412Plus
Advertisement
Table of Contents
