Table of Contents
Advertisement
Introduction
Configuration Methods
Reading Configuration Codes
This manual can be used for complete setup and configuration. If you wish to change the
default settings, you can configure the Gryphon D432/D412Plus reader by reading the
programming code symbols in this manual. Configuration commands and their relative
arguments are read individually using the symbols in this manual. See Appendix D.
Using Datalogic Aladdin™
The Datalogic Aladdin™ program, available for download from the Datalogic Web site, allows
programming the reader by selecting configuration commands or printing them through a user-
friendly graphical interface running on the PC. These commands are sent to the reader over the
current communication interface, or they can be printed to be read.
Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix
COM interface. This method is particularly useful when many devices need to be configured
with the same settings. Batch files containing the desired parameter settings can be prepared to
configure devices quickly and easily.
The Gryphon D432/D412Plus reader incorporates a multi-standard interface, which can be
connected to a Host by plugging the correct interface cable into the connector and closing the
cable cover.
12
A
using the RS-232 or USB
Gryphon™ D432/D412Plus
Advertisement
Table of Contents
