Hitachi 32HDT50 Service Manual page 21

AV NETWORK SETUP WIZARD
5. Follow the steps below to setup the AV network (See page 22 for AV Network Codes).
There are six steps in the setup procedure (VCR setup example below).
DVD POWER
VCR
PV Recorder
AV Receiver
Move
Device Setting
INFO
HITACHI AV NET SET UP
DVD
Device Code 0 6 7 2
(Enter code "9999" to uninstall)
Video Input No Connection
Audio Input No Connection
Transmission Test POWER PLAY
BACK OK EXIT
Move Input
0-9
THUMB
STICK
Proper Code Entered
HITACHI AV NET SET UP
DVD
Device Code 0 6 7 2
(Enter code "9999" to uninstall)
Video Input Input 1
Audio Input No Connection
Transmission Test POWER PLAY
BACK OK EXIT
Move Set Input
SEL Select
THUMB
STICK
HITACHI AV NET SET UP
DVD
Device Code 0 6 7 2
(Enter code "9999" to uninstall)
Video Input Input 1
Audio Input Using TV
Transmission Test POWER PLAY
BACK OK EXIT
Move Set Input
SEL Select
THUMB
STICK
(x2)
HITACHI AV NET SET UP
DVD
Device Code 0 6 7 2
(Enter code "9999" to uninstall)
Video Input Input 1
Audio Input Using TV
Transmission Test POWER PLAY
BACK OK EXIT
Move Set Input
SEL Select
THUMB
STICK
SELECT
HITACHI AV NET SET UP
Congratulations
Your DVD is now
connected to your AV network.
6. To uninstall or change device (equipment), press INFO button on the remote control when the device (DVD, VCR, etc.) is
highlighted.
THUMB
STICK
MENU MORE
0 9
Enter the device (equipment) code listed on page 22.
CH UP
from page 21.
Use THUMBSTICK
is hooked-up to.
CH UP
Transmission test for the device to confirm that the proper code was
set, by selecting (POWER, PLAY, etc.) soft keys shown. If the device
responds to the transmission test soft key, then it is properly set up.
Select OK to continue.
CH UP
DVD
VCR
PV Recorder
AV Receiver
CH UP
Move
HITACHI AV NET SETTING LIST
Device
DVD
VCR
PVR
AVR
CBL
STB
Custom
EXIT
SEL
HITACHI AV NET SET UP
DVD
Device Code - - - -
(Enter code "9999" to uninstall)
Video Input No Connection
Audio Input No Connection
Transmission Test POWER PLAY CH UP
BACK OK EXIT
Move Input
0-9
to select the input that the device (equipment)
POWER MENU MORE
Device Setting
INFO
THUMB
STICK
SELECT
Code Video Audio
0672 INPUT 1 Using TV
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
Select
21
PT3-E/G AVC3-U