Hitachi 32HDT50 Service Manual page 28

RGB MODE ON-SCREEN DISPLAY
Video
Aspect
Setup
Contrast
Brightness
Color Temperature
Enhancer
Reset
Real
Normal
Full
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Change the contrast between black and white levels in the
picture.
Adjust overall picture brightness.
Select between HIGH (9,300K), MEDIUM (7,500K),
STANDARD (6,500K), or Black/White (5,400K).
Enhance picture details (Off, Low, Middle or High).
Recall the factory preset data of the RGB Video Settings.
Aspect as it is presented in its true resolution.
Aspect in 4:3 standard.
Aspect in 16:9 standard.
Automatically adjust the geometry to fit the screen.
Adjust horizontal position.
Adjust vertical position.
Adjusts the dot clock frequency to reduce the vertical stripe.
Adjusts the phase to correct blurred or unstable images.
Recall the factory preset data of the RGB setup settings.
Set the preferred input signal level.
Turns the gray side bars ON/OFF when watching 4:3 signals in
standard mode. Turning ON the gray side bars will prolong the
life of the PRT.
28
PT3-E/G AVC3-U