Chapter 18 Wireless Remote Control (Th-D7A Only) Preparation - Kenwood TH-D7A Instruction Manual

If you also have a KENWOOD multi-band mobile
transceiver, you can control one of its bands by sending
DTMF tones from this handy transceiver. You will find
this function useful when you want to control your mobile
transceiver from a location outside your vehicle.
Note:
You can remotely control only the mobile transceivers that have both
the DTSS and Remote Control functions.
The FCC rules permit you to send control codes only on the 440 MHz
band.
WIRELESS REMOTE CONTROL (TH-D7A ONLY)
PREPARATION
Let us assume the VHF band of the mobile transceiver
will be controlled.
On the handy transceiver:
1 Press [PTT]+[VFO]+ POWER ON.
• The current secret access code number appears. The
default is 000.
2 Press a numeric key 0 to 9 to enter a 3-digit secret
number.
• You can also press [UP]/ [DWN] to select each digit.
Press [OK] (or [ESC]) to move the cursor to the next (or
previous) digit.
3 Press [OK] to complete the setting.
4 Select the UHF band.
5 Select the transmit frequency.
STA CON 96BCONDUP
9
7
5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
81
1
2
3
4
5
6
7
8
9