Configuration Menu Screen - AEC A0551794 RS Series Manual

Configuration Menu Screen

This screen allows the operator to configure the settings for the compressors, pumps, chiller
setpoint, and high and low temperature alarm setpoints.
Operating the chiller compressors
To enable or disable the individual compressors, start at the Main Menu, then:
1. Press the Up or Down buttons on the right side of the screen to highlight "Chiller
Configuration"
2. Press the
The configuration menu screen displays:
Figure 8: Chiller Configuration Screen
3. Touch the screen corresponding with the compressor you want to bring On-Line or
Off-Line. The background color of the square turns green for On-Line and red for
Off-line.
Screw Compressor Central Chiller
button
Chapter 4: Operation 56