Configuration Menu Screen - AEC A0551794 RS Series Manual

Configuration Menu Screen

This screen allows the operator to configure the settings for the compressors, pumps, chiller
setpoint, and high and low temperature alarm setpoints.
Operating the chiller compressors
To enable or disable the individual compressors, start at the Main Menu, then:
1. Press the
"CONFIGURATION MENU"
2. Press the
The configuration menu screen displays:
3. Press the
"CIR 2 COMP ENABLES"
4. Press the
The compressor enable screen displays:
Screw Compressor Central Chiller
or buttons on the right side of the screen to highlight
button
Chiller Configuration Screen
or button to highlight either "CIR 1 COMP ENABLES" or
Chapter 4: Operation 41