Ford 2004 Expedition Owner's Manual page 118

Driver Controls
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the ON position.
3. Start the engine.
4. Press the TRIP/RESET button
(near your odometer display), hold
for six seconds and release. You will
see that ZONE appears in the
instrument cluster display.
5. Press and release the button until
the desired zone number appears.
Note: The range of zone values are from 01 to 15 and "wraps" back to
01.
6. When you get to the desired ZONE number, hold the TRIP/RESET
button down to "lock in" the new value.
The cluster display will return to the "normal" mode when the
TRIP/RESET button has not been pressed for 6 seconds.
Compass calibration adjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration
mode, press and hold the
TRIP/RESET button for greater than
eight seconds. The display will then
show CAL in the display window.
118
2004 Expedition (exd)
Owners Guide (post-2002-fmt)
USA English (fus)
3 2 1
4
5
6 7 8 9 1011
15
14
13
12