Area where paper holes are prohibited
and reflection rate for the back of
paper should be 40% or more.
Paper feed direction
Use thinner paper (N30 or equivalent) between the top and
bottom sheets of multi-ply paper. If thick paper is used, the
copy capability is lowered.
Notes:
When inserting slip paper, be sure to use the slip side guide and form
stopper. If you insert the slip paper beyond the form stopper, the slip paper
may be ejected.
Do not print on slip paper in the reverse paper feed direction.
Electrical Characteristics
Supply voltage:
Ripple voltage:
Current
consumption:
(at 24V, except
for drawer kick-
out driving)
4-8 Reference Information
15
+24 VDC ± 10% (optional power supply: EPSON
PS-170)
300mVpp or less (only when the printer is used
with the MICR reader).
Operating: Mean: approximately 1.9A
(character font A α-N all columns
printing
)
Peak: approximately 8.0A (20 msec)
When the print platen is released:
2.0A (200 msec)
Standby:
Mean: approximately 0.3A
24
10
Paper holes and translucence
prohibited area.
[Units: mm (All the numeric values are typical.)]
H504_8.eps