Maintenance - DeWalt DW682K Operator's Manual

• Clamp the workpiece and align the tool as shown (fig. U4).
• Cut the biscuit slots as described above.
T-joints (fig. V1 - V5)
This type of joints is commonly used to attach shelves to side panels (fig. V1).
• Place the workpieces on a flat surface as they are to be assembled
(as an upside down T).
• Mark the biscuit centres on the shelf piece.
• Lightly mark the top of the shelf on the side panel (fig. V2).
• Clamp the fence on top of the side panel, aligning the end of the shelf
with the line (fig. V3).
• Select the appropriate biscuit size.
• Set the fence to 0°.
• Align the tool with the biscuit marks using the markings on the tool base.
• Make a vertical (fig. V4) and a horizontal (fig. V5) cut at each of the
biscuit locations.
Consult your dealer for further information on the appropriate accessories.

Maintenance

Your D WALT Power Tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
15
WALT repair agent where it will be
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT tool, simply return it within 30 days, complete as purchased,
E
to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase,
we guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual.
E N G L I S H
WALT tool, in the
E
WALT repair agent,
E
en - 5