Function - Midea MSY-09HRDN1-QC8 Service Manual

2. Function

Indoor unit
Operation by remote
controller
Sensing by room
temperature
Room temperature
sensor.
Pipe temperature
Room temperature
control
Maintain the room temperature in
accordance with the setting temperature.
Anti-freezing control in
cooling
Prevent the water being frozen on evaporator by
sensing the evaporator pipe temperature in
cooling mode
Time Delay Safety
control
Restarting is for approx. 3
minutes..
Indoor fan speed control
Turbo, high, med, low, breeze.
Two-direction air vane
The unit will decide the louver direction
according to
operation mode.
Sleep mode auto control
The fan is turn to low speed
(cooling/heating).
The unit will be turn off at the seventh
Independent
dehumidification
The function is usually used in rainy
days in springtime or damp areas.
Air flow Direction control
The louver can be set at the desired
position or swing up and down
automatically
Auto mode
The mode can be change by the room
temperature.
Temp. Compensation
Golden fin
(Optional)
Compact
design
Super Ionizer
Self clean
Follow
me
Self-diag. function
Anti-cold function
Prevent the cold wind at
the beginning of unit start.
Auto defrost
Auto-restart function
When the power supply is
interrupted and then restore, the
air conditioners automatically
restore the previous function
setting.
Flexible wiring
connection
4