Getting Started; Initial Settings - Sony CDX-C90 Operating Instructions Manual

Getting started

Initial settings

Do the following initial settings before you
operate the unit for the first time, after replacing
the car battery, or after resetting the unit.
Be sure to make these settings, otherwise the front
panel is disabled and you will be unable to insert
a CD.
Tip
You can reset all of
these initial settings
(except the ACC
position setting) using
the set up menu.
EN
Note
You can specify the
ACC position settings
only in the initial
setting procedure. To
change these settings
afterwards, press the
reset button and repeat
the procedure.
4
Getting started
1
Press the reset button behind the front panel
(see page 2).
The Contrast indication appears.
Press ? or / to adjust the contrast. The contrast is
adjustable to 15 levels.
Contrast
2
Press ENTER.
The ACC Position indication appears.
Press ? or / to select "yes" or "no." Select "yes" if
your car's ignition switch has an ACC position; select
"no" if your car's ignition switch has no ACC position.
ACC Position
y es
3
Press ENTER.
The Digital out indication appears.
Press ? or / to select "on" or "off" depending on
your car audio system. Select "on" when an optional
equipment with digital input is connected to the unit.
Digital out
on
MENU
ENTER
8
no
o ff
Cursor