Sony CDX-C90 Operating Instructions Manual page 15

Cursor buttons
While the menu display
appears, press to move the
cursor within a menu display.
When CD or MD is selected,
press > or . to change the
disc and ? and / to locate
a track.
When FM1, FM2, or AM is
selected, press > or . to
select a preset station, or ?
and / to perform automatic
tuning.
BACK button
Press to return to the normal
display during a menu
operation.
ATT button
Press to attenuate the volume.
To return to the previous
volume level, press the
button again.
VOL +/– buttons
Press + or – to adjust the
volume or sound
characteristics.
OFF button
Press to turn off the unit.
LIST button
When CD or MD is selected,
press to display the disc name
list. While the list appears in
the display, press again to
display the track name list of
the current disc (see page 29).
When FM1, FM2, or AM is
selected, press to display the
preset name list (see page 42).
To change the current
SOURCE MODE
selection, use the cursor
SCRL DSPL
buttons to select another disc,
MENU LIST
track, or station, then press
ENTER.
ENTER button
BACK ENTER
Press to carry out the selected
– +
VOL function.
ATT SOUND
OFF
SOUND button
Press to adjust the sound
characteristics (see page 43).
When an optional DSP
(digital signal processor) is
connected, press and hold for
more than two seconds to
switch to the DSP Sound
Tuning Mode (see page 49).
To return to the previous
mode, press and hold the
button again.
EN
15
Getting started