Advertisement
1) Where possible, mount the
detector in the corner of the
room where the logical path of
an intruder would be across
the device. PIR detectors
respond more effectively to
movement across the device
than to movement directly
towards it.
2) Do not position the unit facing
a window or where it is in
direct sunlight. PIR Detectors
are not suitable for use in
conservatories.
3) Do not position the unit where
it is exposed to draughts.
4) Do not position the unit
directly above a strong heat
source.
5) Do not position the unit where
it is subject to excessive
vibration.
INSTALLATION
1) Hold the mounting bracket in
position on the wall and mark
the position of the two fixing
holes.
2) Fix the mounting bracket to
the wall using the fixing screws
and wall plugs supplied, (a
6.5mm hole will be required for
the wall plugs).
Note: The wall plugs supplied
are not suitable for use in
plasterboard walls.
3) Undo the battery cover fixing
screw and remove the cover.
4) Insert 3 x AAA (LR03) Alkaline
batteries noting the correct
polarity shown inside the
battery compartment.
5) Immediately the batteries are
inserted the indicator LED on
the front of the Alarm will flash
for 15s.
During this period you should
enter a 4 digit User Access
Advertisement
