Adding Or Changing A Channel Label; Checking The Digital Signal Strength; Setting Parental Controls; Setting Or Changing The Password - Insignia NS-32D312NA15 User Manual

Adding or changing a channel label

If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then press
or ENTER. The CHANNELS menu opens.
3 Press or to highlight Channel Labels, then
press ENTER. The CHANNELS · CHANNEL LABELS
screen opens.
4 Press or to select the channel you want to
label, then press
field.
5 Press or to select a character, then press
to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11 characters.
6 When you have completed the label, press ENTER.
7 Press EXIT to close the menu.
58
to move to the channel label
www.insigniaproducts.com

Checking the digital signal strength

You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU. The on-screen menu opens.
2 Press
or ENTER. The CHANNELS menu opens.
3 Press
press ENTER. The Channel Strength screen opens
showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Setting parental controls

Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program (with
some exceptions, such as news and sports) and deny
access to programs that exceed the ratings level you
select. To watch programs that exceed the selected
rating, you must enter a password.

Setting or changing the password

1 Press MENU. The on-screen menu opens.
2 Press
or ENTER. The SETTINGS menu opens.
or
Insignia 32" LED TV
or to highlight CHANNELS, then press
or to highlight Channel Strength, then
or to highlight SETTINGS, then press