Traffic Information; Connecting The Traffic Module; Viewing Traffic Events; Avoiding Traffic - Kenwood DNX512EX Instruction Manual

Traffic Information

Using an optional FM Traffic Receiver, the navigation system can receive and use traffic information.
When a traffic message is received, you can see
the event on the map and change your route to
avoid the traffic incident.
For more information about the FM Traffic
Receiver, visit the Garmin Web site at
www.garmin.com/traffic. For participating FM
subscription providers and covered cities, refer to
www.garmin.com/fmtraffic.
⁄
• This section uses "Traffic Module" to describe the external
device that receives traffic information. The FM Traffic
Receiver (such as the GTM 10) can be used.

Connecting the Traffic Module

Make sure the traffic module is connected to the
DNX5120/DNX512EX. Refer to the installation
guide for more information.

Viewing Traffic Events

From the Menu page, touch Tools > Traffic Info.
Select an item in the Traffic Events list to view the
details. Touch Near... to view traffic at a different
location.
1
2
Traffi c Events List
1 Traffic symbol
2 Color code
3 Traffic source (FM Traffic) and signal strength

Avoiding Traffic

The map page displays a
traffic event of medium severity or high severity
on your current route or on the road you are
driving. When you are following a route, touch
1
2
3
3
to avoid the traffic.
From the map, touch
Touch an item to avoid.
Touch Detour Around.
when there is a
.
Next page 3
English 21