Audio Control; [Audio Control]; Audio Control Menu - Kenwood DDX8024BT Instruction Manual

Audio Control

Audio Control Menu

Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the Source Select Screen
2 Display the Audio Control menu
In this manual, the above selection is indicated
as:
>
Touch [ ] [
3 Select the Audio Control item
Item
[Audio Control]
[Equalizer]
[EQ]
[Zone Control]
[SRS WOW]
[Surround Control]
[Position]
54 DNX9240BT/DDX8024BT/DDX8054BT
SRC
].
Page
54
55
55
56
56
57
58
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display the Audio Control screen
> >
Touch [ ] [ ]
2 Set each item
1 1 1
1 Adjusts the front/back and left/right
balance of the volume by touching the Adjust
screen.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
⁄
• If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
[Audio Control]. (page 54)