Listening to the DAB
You can change the display information of the
currently broadcasting DABchannel. Press
DAB INFO. on the remote control repeatedly, the
display changes in the following order,
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
Select a display mode and then press C/V,
the initials of the servicename are displayed.
SERVICE
D isplays the Name of the channel for
the current broadcast.
PTY NAME
Displays the Type of the channel for
the current broadcast.
FREQ
D isplays the frequency of the channel
for the current broadcast.
DLS
It displays the current Scroll of the
channel which is selected.
QUALITY
It displays the current strength of the
broadcast signal in Bar form.
ENSEMBLE
Displays the Ensemble of the channel
for the current broadcast.
Aligning the service names
Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Default sort: T he service names are aligned in a
scanning order.
Name sort:
T he service names are aligned in an
alphabetical order.
DAB scan
Press SORT/SCAN on the remote control for longer
than 3 seconds, all ofthe DAB bands are scanned.
Then press it again, scanning will be cancelled.
Deleting all of the saved DAB
scan stations
Press and hold DAB INFO. on the remote control for
3 seconds. "DAB INIT" will be displayed. Press
DAB INFO. to erase all the saved stations.
Operating
47
4