Radio Operations; Listening To The Radio; Presetting The Radio Stations; Deleting All The Saved Stations - LG DM2740DAB Owner's Manual

30 Operating

Radio Operations

Be sure that FM and DAB aerial is connected. (Refer
to the page 17.)

Listening to the radio

1. Press P RADIO&INPUT until FM or DAB
appears in the display window.
The last received station is tuned in.
2. [FM]
Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Press TUNING (-/+) repeatedly.
[DAB]
Press TUNING (-/+) and press d PLAY.
4
3. Adjust the volume by rotating -/+ on the front
panel or by pressing VOL (+/-)on the remote
control repeatedly. In DAB function, press d
PLAY, MONO/STEREO to start.

Presetting the Radio Stations

You can preset 50 stations for FM or DAB.
Before tuning, make sure that you have turned
down the volume.
1. Press P RADIO&INPUT until FM or DAB
appears in the display window.
2. [FM]
Select the desired frequency by using
TUNING (-/+).
[DAB]
Press TUNING (-/+) and press d PLAY.
3. Press b ENTER a preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press b ENTER. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.

Deleting all the saved stations

1. Press and hold CLEAR for two seconds.
"ERASE ALL" will flash up on the unit display.
2. Press CLEAR to erase all saved of the radio stations.
DM2740-CB_DAUSLLK_ENG.indd 30
Or

Deleting a saved station

1. Press PRESET - / + to Select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected
preset number.

Improving poor FM reception

Press d PLAY, MONO/STEREO on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.

Listening to the DAB

You can change the display information of the
currently broadcasting DABchannel. Press
DAB INFO. on the remote control repeatedly, the
display changes in the following order,
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
SERVICE
Displays the Name of the channel for
the current broadcast.
PTY NAME
Displays the Type of the channel for
the current broadcast.
FREQ
Displays the frequency of the channel
for the current broadcast.
DLS It displays the current Scroll of the
channel which is selected.
QUALITY It displays the current strength of the
broadcast signal in Bar form.
ENSEMBLE Displays the Ensemble of the channel
for the current broadcast.

Aligning the service names

Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Default sort: The service names are aligned in a
scanning order.
Name sort: The service names are aligned in an
alphabetical order.
2014-04-14 4:44:13