Table of Contents
Advertisement
Listening to the DAB
You can change the display information of the
currently broadcasting DAB channel. Press
DAB INFO on the remote control repeatedly, the
display changes in the following order;
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
Select a display mode and then press
TUNING-/+, the initials of the servicename are
displayed.
SERVICE
Displays the Name of the channel for
the current broadcast.
PTY NAME
Displays the Type of the channel for
the current broadcast.
FREQ
Displays the frequency of the channel
for the current broadcast.
DLS
It displays the current Scroll of the
channel which is selected.
QUALITY
It displays the current strength of the
broadcast signal.
ENSEMBLE
Displays the Ensemble of the channel
for the current broadcast.
Aligning the service names
Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Default sort: The service names are aligned in a
scanning order.
Name sort:
The service names are aligned in an
alphabetical order.
DAB scan
Press SORT/SCAN on the remote control for longer
than 3 seconds, all of the DAB bands are scanned.
Then press it again, scanning will be cancelled.
Deleting all of the saved DAB
scan stations
Press and hold DAB INFO on the remote control for
3 seconds. "DAB INIT" will be displayed. Press
DAB INFO to erase all the saved stations.
Other Operation
Programmed Playback
The program function enables you to store your
favourite tracks/files from any disc or USB device.
A program can contain 20 tracks/files.
1. Insert a CD or connect USB and wait for it to be
loaded.
2. Press PROGRAM/MEMORY on the remote
control in stop state.
3. Press C/V on the remote control to select
a next track/file.
4. Press PROGRAM/MEMORY again to save and
select a next track/file.
5. Press d/M to play the programmed music
tracks/files.
6. To clear your selection, press twice Z ENTER on
the remote control and I(stop) on the unit.
,
Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
Displaying file information
(ID3 TAG)
While playing an mp3/wma file containing file
information, you can display the information by
pressing INFO on the remote control.
Resume playback
During playback, if you change to another function,
then return to the USB/CD function, and then press,
you can listen to music from last point you played.
Turn off the sound temporarily
Press @ on the remote control to mute your
sound. You can mute the sound in order, for
example, to answer the telephone. And "MUTE"
will blink in the display window. To cancel mute
function, press @ again or press VOL(+/-) on the
remote control or p/o on the unit
Operating
21
2
Advertisement
Table of Contents
