Remote Operation; Connect With The Answering System - AT&T 1722 User Manual

Connect with the Answering System

You can access many features remotely from
a touch tone phone.
1 Dial your telephone number.
2 When the system answers, enter your
three-digit Remote Access Code during
or after the announcement. The system
announces the number of messages,
then begins message playback. If the
announcement continues to play after
Feature Summary
FUNCTION:
VOICE HELP MENU
PLAY ALL MESSAGES
PLAY NEW MESSAGES
REPEAT A MESSAGE
STOP MESSAGE PLAYBACK
SKIP A MESSAGE
SAVE MESSAGE
DELETE MESSAGE
DELETE ALL MESSAGES
RECORD ANNOUNCEMENT
REVIEW ANNOUNCEMENT
RECORD MEMO
SET THE CLOCK
TURN SYSTEM OFF
TURN SYSTEM ON
MEMORY FULL
END REMOTE ACCESS CALL

REMOTE OPERATION

COMMAND:
Press 5.
After the two beeps, wait four seconds for system to
automatically play back all messages, or press 1.
Press 2.
Press 4 while the message is playing.
Press 5.
Press 6 while the message is playing..
Hang up.
Press and release 3 while the message is playing.
After you have listened to all messages and heard the
two beeps, press 3 3.
Press * 7; after beep, record announcement, press
5 to stop. System plays back announcement.
Press 7.
Press #; speak after beep; press 5 to exit.
Press * 8. Follow prompts to set day, time, and year.
Press * 0.
When system is off, it answers after 10 rings,
announces "T
Press * 0.
When the memory is full, the system answers after 10
rings, announces "M
Enter your Remote Access Code and delete some or
all messages. Press * 0 to make sure system is on
before hanging up.
Press * 9. The system announces "T
WILL NOW HANG UP
entering your code, wait for the
announcement to end or press #
to stop the announcement, then
re-enter the code.
3 To use a remote access command
(below), press 5 during message
playback and wait for the two-beep
signal.
4 Enter a remote access command.
HE MACHINE IS OFF
EMORY IS FULL
," and disconnects the call.
8
," then beeps twice.
," then beeps twice.
HE MACHINE