Remote Controller; Battery Installation; Remote Controller Mode Switch - Kenwood KDV-MP6433 Instruction Manual

Dvd receiver
Hide thumbs Also See for KDV-MP6433:
Table of Contents

Advertisement

Remote Controller

This unit can be operated using the Remote Controller supplied with the unit.
• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
• Do not place the battery near an open flame or heat source. This may cause the battery to explode.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.

Battery installation

Using a pen tip or similar object, open the battery
compartment in Direction 2 (as shown) while
unfastening the lock in Direction 1 (as shown).
Insert the lithium battery (CR2025) supplied,
making sure the polarities are correct. (See the
illustration inside the battery compartment.)
• If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that the
lithium battery is depleted. In such instances, replace the
battery with a new one.
54
KDV-MP6333/KDV-MP6433

Remote Controller mode switch

The functions operated from the remote
controller differ depending on the position of the
mode switch.
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
• When controlling a player that is not integrated in the
unit, select "AUD" mode.
• When TV mode is set, point the remote controller to
the connected Kenwood monitor (optional accessory)
for operation. However, the functions available may be
restricted depending on the connected TV monitor.
AUD mode
Switch to this mode when
controlling a selected source
or a CD changer etc.
DVD mode
Switch to this mode when
playing DVDs or CDs etc.
with the player integrated in
this unit.
TV mode
This is switched when
controlling TV.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdv-mp6333

Table of Contents