Net Tab - Covert 2014 Code Black Instruction Manual

NET tab:

Press the ▲ and ▼ buttons until just the PIR tab is
highlighted and then use the ► to highlight the NET
option.
Most of the settings under the NET tab are
controlled in the original camera set up. You will
not be able to make changes to these settings from
the camera. You would have to repeat the steps for
setting up the wireless network to make changes to
these settings.
Note: In order to make changes to your setup, you
will have to insert your card back into your
computer.
SMS SWITCH: The only option that is controlled
under the NET tab is the SMS Switch. This switch
controls whether you can send SMS texts to your
camera to change the basic settings. If this switch is
set to ON, you will be able to communicate with
your camera via text message through your phone.
If the setting is set to OFF, this function is disabled.