System Connections - Kenwood DVF-3200 Instruction Manual

System Connections

Caution:
Do not plug in the power lead until all connections are completed.
Make connections as shown below.
When connecting the related system components, re-
fer also to the instruction manuals of the related com-
ponents.
Connecting to a TV with video (composite) or S-video input terminal
TV
Connecting to a TV with SCART input terminal (For Europe)
TV
INPUT
SCART
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the
Note Note
copy protection system.
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is
connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to
the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
Video cord
Audio cord
Rear panel example
(for U.S.A.)
R L
VIDEO
AUDIO
INPUT
S VIDEO
*S-video (Commercially available)
(Except for Europe)
Rear panel example
( For Europe)
SCART cable (Commercially available)
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the mi-
crocomputer referring to "In case of difficulty".
* Connect only either the video (com
posite) cord or the S-video cord.
^ "TV Output Select
(only for Europe)"
11
DVF-3200/DVF-3250 (EN/K,E,X)
¤