System Connections; Loudspeakers - Kenwood DVT-6300 Instruction Manual

System Connections

Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm

Loudspeakers

Subwoofer
Front
speaker R
Red
Rear
speaker R
Gray
Speaker model name
System model name Front L, R, Center
Rear L, R
DVT-6300
DVT-7300
DVT-8300 KS-908HT
Side panel : 10 cm
Purple
Center speaker
Green
Speaker system name
Subwoofer
KSW-6300
KSW-7300
SW-18HT
Caution:
Do not plug in the power lead until all connec-
tions are completed.
Back panel : 10 cm
Front
speaker L
White
Rear
speaker L
Blue
Refer to instruction manual for speaker stand in speaker part.
Refer to each instruction manual for speaker system in speaker part.
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to "In case of
difficulty".
1 2
Excessive insertion of the cable
Note
Note
can cause defective contact.
Attaching the cushions
(For DVT-6300 and DVT-7300)
Attach cushions to the base of the speaker as
shown below. The cushions prevent the
speaker from sliding, and dampen its vibra-
tions.
Center speaker
Front speakers,
Surround speakers
Subwoofer
Attach four cushions to the base of the
subwoofer, one at each corner.
Remark
9
DVR-6300 (EN/K,P,E,X)
e
3