Kenwood DVF-3200 Instruction Manual page 12

12
Connecting to a TV with Component input terminals
TV
Connecting to an Audio component
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-
nection.
TV
Video cable, S-video cable, or Component cords (Commercially available) (!)
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:
Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS):
Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL) to the corresponding in jack on your amplifier. Use a digital (coaxial)
cable.
1. In case an associated system component is connected, also read the instruction manual of the component.
2. If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces
Notes Notes
a strong, distorted sound or no sound at all.
3. Insert the optical-fiber cable straight into the connector until it clicks.
4. Never bend or bundle the optical-fiber cable.
Audio cord
Rear panel example
(For U.S.A.)
Component cords (Commercially available)
R L
AUDIO VIDEO COAXIAL
INPUT DIGITAL INPUT
AV receiver or AV Amplifier
Video cord
Audio cord
Coaxial cable
Rear panel example
(For U.S.A.)
System Connections
DVF-3200/DVF-3250 (EN/K,E,X)
^ "TV Output Select
(only for Europe)"