Pcb & Shield Can Lid, Camera Assy - Sony Ericsson K810 Working Instruction, Mechanical

Working Instruction, Mechanical
4.1.1 PCB & Shield Can Lid, Camera Assy
MAKE SURE THE BLUETOOTH ANTENNA´S CONTACT FINGERS
!
ARE UNDER THE PBA
Place the indicated tab portion of the PBA into the slot on
the Frame assy.
Rotate the PBA so that the system connector is put into the
Frame assy.
SECURE ONCE AGAIN SO THAT THE BLUETOOTH ANTENNA´S
!
CONTACT FINGERS ARE UNDER THE PBA
Make sure that the Xenon flash flex film is between the
Frame assy and the PBA.
Put out the Camera flex film through the large hole.
3/000 21-1/FEA 209 544/134 E 57(69)
©
Company Internal Sony Ericsson Mobile Communications AB