Shield Can Lid A1 - Sony Ericsson X10i Working Instructions

Replacement

4.29 Shield Can Lid A1

Follow the 3.1 – 3.5 Disassembly instructions!
Prepare a new Shield Can Lid A1.
Follow the 5.2 – 5.6 Reassembly instructions!
REMOVAL
Unsnap the corners of the Shield Can Lid A1 with a pair of
tweezers and remove it.
Scrap! Cannot be reused!
INSTALLATION
Place a new Shield Can Lid A1 from lower side as shown.
Follow the assembly steps firmly!
Press to snap on both sides with fingers following the order
as the arrows shown.
Follow the assembly steps firmly!
1230-2324 Rev 6

Sony Ericsson Mobile Communications AB – Company Internal
Working Instruction Repair Instruction Mechanical/
59(81)