Sony Ericsson K810 Working Instruction, Mechanical page 38

Working Instruction, Mechanical
Xenon Flash continued
INSTALLATION
Obtain a new Xenon flash and orient it to its cavity in the
Frame assy.
Verify that the Xenon flash goes under the placement peg.
Place the Xenon flash to the frame so that it fits the two
guiding pins.
Use your fingers to snap the capacitors in their cavity in the
frame assy.
Follow the 4.1.6 – 4.1.10 Reassembly instructions!
3/000 21-1/FEA 209 544/134 E 38(69)
©
Company Internal Sony Ericsson Mobile Communications AB