Kenwood TK-260G Service Manual page 15

No. Function Choices Display
34 D Key D Code DKA_D_CD
Assignment 1-16/1s DKA_16__
35 DTMF Code SQ DTMF_OFF
Signaling SEL CALL DTMF_SEL
36 Inter Mediaate 0-9,A-D,*,# IMC__#_
Code
37 Group Code 0-9,A-D,*,# GPCD_FF_ Default;OFF
38 Auto Rest OFF ART_OFF_
Time 1-15/1s ART__10
39 Call Alert/ OFF CA/T_OFF
Transpond Call Alert CA/T_C/A
Transpond CA/T_T/A
(Call Alert)
Transpond CA/T_T/I
(ID Code)
Transpond CA/T_T/T
(tanspond Code)
Others
40 Panel Test/panel Enable PTM_ENA
Tuning MODE Disable PTM_DIS
8-4. Memory Reset Mode
This mode is used to clear data for functions that can be set
in Self Programming Mode or to return to reset values (default).
Pressing [ ] when "SELF" is shown, sets the display to
"CANCEL".
Turning the encoder alternately switches the display
between "CANCEL" "READY".
Pressing [ ] when "READY" is shown, clears the data and
sets the display to "CLEAR".
Pressing [ ] again, returns the display to "SELF".
Pressing [ ] when "CANCEL" is shown, returns the display
to "SELF" without resetting the data.
REALIGNMENT
Remarks
Default
Default
Default: # (Can be set only when
DTMF signaling = SEL CALL.)
Default;10s
Default
Default (Not used for TK-260G)
TK-260G/270G
When the [ ] switch is pressed while "SELF" is displayed,
the memory is reset.
When the memory is reset, mode data and model data are
not reset.
The TK-260G cannot reset the memory.
Flow Chart
Function Setting Mode
[LAMP]
Self programming mode
[LAMP]
[LAMP] [LAMP]
Function set mode
[LAMP] [LAMP]
[LAMP] key function
[2]/[3]
[LAMP] [LAMP]
[MON] key function
[2]/[3]
[LAMP] [LAMP]
[ ] key function
[2]/[3]
[LAMP] [LAMP]
[ ] key function
[2]/[3]
[LAMP] [LAMP]
[2]
key function
[2]/[3]
[LAMP] [LAMP]
[3]
key function
[2]/[3]
[LAMP] [LAMP]
[CH]
key function
[2]/[3]
[LAMP] [LAMP]
Power on tone yes/no
[2]/[3]
[LAMP] [LAMP]
Contorol tone yes/no
[2]/[3]
[LAMP] [LAMP]
WArning tone yes/no
[2]/[3]
[LAMP] [LAMP]
Time Out Timer
[2]/[3]
[LAMP] [LAMP]
T.O.T. Pre-alert time
[2]/[3]
[LAMP] [LAMP]
T.O.T. Rekey time
[2]/[3]
[LAMP] [LAMP]
T.O.T. Reset time
[2]/[3]
[LAMP] [LAMP]
Clear to Transpond
[2]/[3]
[LAMP] [LAMP]
Battery Save on/off
[2]/[3]
[LAMP] [LAMP]
Signaling
[2]/[3]
[LAMP]
Group code
Squelch level
[2]/[3]
[LAMP]
Auto reset time
Priority
[2]/[3]
[LAMP]
Look back time A Call alert/Transpond
[2]/[3]
Look back time B
[LAMP] Panel test/Panel tuning
mode
[2]/[3]
Revert channel
[2]/[3]
Dropout delay time
[2]/[3]
Dwell time
[2]/[3]
Digit time
[2]/[3]
Inter digit time
[2]/[3]
First digit time
[2]/[3]
First digit delay
[2]/[3]
Rise time with QT
[2]/[3]
Dial ID
[2]/[3]
No. of DTMF key
[2]/[3]
DTMF hold time
[2]/[3]
Store & Send
[2]/[3]
D key assignment
[2]/[3]
DTMF signaling
[2]/[3]
Inter mediate code
[2]/[3]
[2]/[3]
[2]/[3]
[2]/[3]
15