Control Buttons Used In Setups; Basic Operations In Setup Screen - Kenwood DV-4070 Connection And Setup Manual

Control Buttons Used in Setups

SET UP button: Press to display the "SETUP MENU".
(Set the mode switch to the Purple position before
pressing this button.)
Joystick: Tilt the joystick in the 4 directions of up,
down, left and right to move the cursor to the de-
sired point.
ENTER button: After moving the cursor to the de-
sired point, press the ENTER button to enter the
point and display the next setup screen.
RETURN button: Press to return to the previous setup
screen.
Numeric buttons, C (Clear) button: Use these but-
tons to input a figure using numeric buttons or to
clear an input with the C button. (Set the mode
switch to Orange position before pressing any of
these buttons.)
ENTER button
ENTER
Joystick
Mode switch
¢
3
PAGE
PLAY
INDEX
4
7
PAGE
INDEX
STOP
ON SCREEN
TOP MENU
SQ.MODE
P.MODE
RETURN button
RETURN
1 8 ¡
C (Clear) button
+10
0 C
REPEAT A-B REPEAT CHECK
SET UP button
1 2 3
Numeric buttons SET UP ALL INFO.
4 5 6
T.SEARCH TEXT DISP. SKIP
7 8 9
P.AUDIO P.B.C. MENU
AUDIO TIME DISP.

Basic Operations in Setup Screen

The "SET UP MENU" includes the "MAIN", "SOUND"
and "VISUAL" menus. When a setup screen is
displayed, select the desired item according to the
purpose.
If the power is turned off while the setup screen
remains displayed after setting changes, the changes
will be invalid. Be sure to close the setup screen before
turning power off.
1.
Set the mode switch of the joystick remote to the
Purple position.
2. 1
Press to open the "SET UP MENU" in which
SET UP
"MAIN" is displayed.
SET UP MENU
EXIT
MAIN
Tilt the joystick up or down to switch the displayed
menu name to "SOUND" or "VISUAL".
¶ When you press the RETURN button or tilt the
joystick in the direction of arrow "EXIT" while
the "SET UP MENU" screen is displayed, the
setup mode can be canceled.
Chapter 2: Various Setups
3.
Press to open the setup screen.
ENTER
¶ While a setup screen is displayed, tilting the
joystick toward "EXIT" allows the setup mode
to be canceled and tilting it toward "MENU"
returns to the "SETUP MENU".
4.
Select the desired item by tilting the joystick in the
required direction, then press
ENTER
setup change screen.
5.
Select a setting by tilting the joystick in the required
direction and press to enter the change in
ENTER
memory.
¶ Press the RETURN button or tilt the joystick to
the left to return to the setup screen.
For actual setup operations, see page 18 and after.
to open the
15