Table of Contents
Advertisement
"IPB Display" Setting
With the MPEG2 which is one of the video display
methods of DVD, each picture is divided into the
following three picture types before being coded in
digital signal.
I-picture (in-frame coding): This is the standard
video and can constitute a picture by itself. As the
highest picture quality can be obtained, the still
image of I-picture is most suitable for use when
adjusting the picture quality.
P-picture (forward prediction coding): Picture cal-
culated based on past pictures (I-picture or P-pic-
ture).
B-picture (bidirectional prediction coding): Pic-
ture calculated by comparing the previous and next
pictures (I-pictures or P-pictures). This picture type
contains least amount of video information.
When IPB Display is set to "On", the I, P or B type of
DVD still picture is displayed on the TV screen to help
identify whether the picture is I-picture, P-picture or
B-picture. This makes it possible to find the I-picture
which is the standard video containing most amount
of information.
At the factory, the player has been set to "Off" with
which the IPB display is not shown.
Setting items
"
" : Select to return to the previous screen.
"On" : Select to view the IPB display.
"Off" : Select to not to view the IPB display.
24
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
display the "MAIN" menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
4.
In the setup menu, select "IPB Display" by tilting
the joystick up or down and press
Rating
7
TV Aspect
7
On
TV Mode
7
Off
TV Monitor Type
DVD VIDEO Mode
OSD Position
On Screen Message
IPB Display
5.
Select "On" or "Off" by tilting the joystick up or
down, then press
to enter the selection in
ENTER
memory.
1
to
SET UP
.
ENTER
Chapter 2: Various Setups
Advertisement
Table of Contents
