Subscribe to Our Youtube Channel
Related Manuals for EverRide WASP EGWKA1332S
Summary of Contents for EverRide WASP EGWKA1332S
- Page 1 WASP Owner/Operator Manual Manuel Du Propriétaire/Utilisateur Models 988410 - EGWKA1332S 988411 - EGWKA1336S 988412 - EGWKA1548S ENGLISH 03823902 1/09 FRANÇAIS Printed in USA...
-
Page 2: Table Of Contents
They are printed on a serial number are also available as a free download on our label, located on the frame of your unit. website: Unit Serial www.everride.com Engine Serial Number Label Number Label Manuales en idiomas diferentes del ingles Puede obtener manuales en idiomas diferentes del inglés en su distribuidor. -
Page 3: Safety
DEALER DELIVERY Use only EverRide replacement parts. The replacement of Dealer should: any part on this vehicle with anything other than an EverRide 1. Check all controls for proper function. authorized replacement part may adversely affect the 2. Check the safety interlock system to make sure that it performance, durability, or safety of this unit and may void is functioning properly. - Page 4 NOTATIONS 1. Danger! To avoid serious injury or death NOTE: General reference information for proper operation and maintenance practices. Read the operator’s manual. IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment. OL1801 PRACTICES AND LAWS Keep children and others away from unit Practice usual and customary safe working precautions, for while operating.
- Page 5 3. Warning! b. Never remove gas cap or add fuel when engine is running. Do not smoke. c. Never refuel or drain the machine indoors. Always stand clear of discharge. • Check that the operator’s presence controls, safety switches and shields are attached and functioning properly.
- Page 6 • Be aware of the mower discharge direction and do not • Study mowing area. Set up a safe mowing pattern. Do point it at anyone. not mow where traction or stability is doubtful. • Do not operate the machine while under the influence Parking Safely of alcohol or drugs.
- Page 7 • Keep hands, feet and clothing away from mower deck • Always wear safety goggles, or safety glasses with when engine is running. side shields, and a hard hat when operating the machine. • Be alert at all times, drive forward carefully. People, especially children can move quickly into the mowing •...
- Page 8 • Keep all parts in good working condition and all Tire Safety hardware tightened. Replace all worn or damaged decals. • Check grasscatcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary. Grasscatcher components are subject to wear, damage, and deterioration which could expose moving parts or allow objects to be thrown.
-
Page 9: Assembly
• Never store the machine or fuel container where there Handling Waste Product and Chemicals is an open flame, spark, or pilot light such as on a water heater or other appliance. • Prevent fire and explosion caused by static electric discharge. -
Page 10: Controls And Features
CONTROLS AND FEATURES 1. Shift Lever 2. Steering Lever Latches 3. Steering Levers 4. Throttle Lever 5. Ignition Switch 6. PTO Switch 7. Operator Presence Controls 8. Fuel Cap 9. Recoil Starter Handle 10. Traction Belt Guard 11. Choke Control Figure 3 GB - 10... -
Page 11: Operation
OPERATION Steering Levers WARNING: AVOID INJURY. Read and understand the entire Safety section before WARNING: AVOID INJURY. When the engine is proceeding. running and the shift lever is engaged, releasing only one steering latch causes the unit to circle CONTROLS AND FEATURES around one drive wheel. - Page 12 Shift Lever Fuel is blended to give best seasonal performance. To avoid engine performance problems such as hard starting or vapor The shift lever sets the direction and speed of the unit. lock, use in-season fuel. Use fuel during warm weather that R = reverse was purchased during that season, and use fuel during cold N = neutral...
- Page 13 7. Let the rope rewind slowly. WARNING: AVOID INJURY. When the engine 8. Pull rope with rapid continuous full arm stroke to start is running and the shift lever is engaged, engine. Allow rope to rewind slowly. releasing only one steering latch causes the IMPORTANT: DO NOT let starter handle snap against unit to circle around one drive wheel.
- Page 14 To mow: Top Mounting Holes 1. Lock steering levers in neutral. 2. Put the shift lever in neutral. 3. Move the throttle lever to the fast position. 4. Engage the operator presence control lever. NOTE: Operator presence control must remain engaged. 5.
- Page 15 Store unused 1/4" WARNING: Sharp edges can cut. Moving parts blade spacers here can cut off fingers or a hand. Wrap blade(s), when not in use. wear sturdy gloves and use extreme caution when servicing. On multi-blade mowers, rotation of one blade will cause all blades to rotate.
- Page 16 CUTTING HEIGHT CHART – DECK BOLTED TO FRAME WITH BOTTOM HOLES Approximate 1/4" Blade Spacers 1/2" Castor Spacers Cutting Height cm (Inches) Stored Between Below Above Spindle and Weldment Weldment Blade 7.0 (2.75) 7.62 (3.0) 8.3 (3.25) 8.9 (3.5) 7.62 (3.0) 8.3 (3.25) 8.9 (3.5) 9.5 (3.75)
-
Page 17: Maintenance Schedule
MAINTENANCE SCHEDULE Period Service Task Check Safety Interlock System WARNING: Safety interlock system failure and improper operation of unit can result in death or serious injury. Test this system each time the unit is operated. If this system does not function as described, do not operate until repairs are made. -
Page 18: Service And Adjustments
SERVICE AND ADJUSTMENTS If unit turns to the left WARNING: AVOID INJURY. Read and 1. Reduce the air pressure in the right tire. understand the entire Safety section before 2. Increase the air pressure in the left tire. proceeding. 3. Check for brake binding on left wheel and adjust as needed. - Page 19 ADJUST BRAKES WARNING: AVOID INJURY. An extension NOTE: The traction belt must disengage as the brake starts spring, when extended, stores energy and to engage. can be dangerous. Always use tools 1. Turn off the engine, remove the key and allow unit to specifically designed for installing or cool.
- Page 20 To adjust: NOTE: Move spring anchor location to hole 1. Stop the engine. Remove ignition key. Put PTO lever in to gain more traction on hilly terrain. the "OFF" position. Put the shift lever in neutral. 2. Loosen two 5/16-18 bolts on shift lever. 3.
- Page 21 6. Install new transmission belt in the top groove of the 32" and 36" BELT REPLACEMENT clutch hub and on the transmission sheave. 7. Slide idler pulley to the belt to tension it, and then tighten the mounting bolt to hold the position. (Figure 15).
- Page 22 6. Tighten the adjusting nut to tension the belt. Tighten MOWER BLADES the nut until the idler spring compresses to NOTE: If mower is used under sandy soil conditions, replace 5.1cm +/– 0.32cm (2 in. +/– 1/8 in.). See Figure 17. blades when air lifts become eroded through at ends 7.
- Page 23 Replacing Mower Spindle Bearings 32" and 36" Decks 1. Turn the engine off. Remove the ignition key. Remove the ignition wire from the spark plugs. 2. Remove mower blade. 3. Remove nut, flat washer, spacer and pulley. 4. Remove spindle shaft, lower bearing and spacer from spindle housing.
- Page 24 Replacing Mower Spindle Bearings - 48-Inch 4. Remove pulleys: Mower Deck • Left Spindle: Remove nut, flat washer and pulley. 1. Turn the engine off. Remove the ignition key. Remove • Center Spindle: Remove nut, drive pulley and spindle the ignition wire from the spark plugs. pulley.
-
Page 25: Service Electrical
Service Electrical NOTE: Do not remove the caster Replace Fuse yoke from the deck to replace the bearings IMPORTANT: Avoid damage! When replacing fuses - and bushings. use only 25-amp fuses or you may damage the circuit. The machine is equipped with one 25-amp fuse to protect the charging circuit. -
Page 26: Storage
SERVICE PARTS STORAGE 07200502 Mower Deck Belt (32-in. Deck) WARNING: AVOID INJURY. Read and 00201010 Mower Deck Belt (36-in. understand the entire Safety section before Deck) proceeding. D38019 Mower Deck Belt (48-in. Deck) Storage – Two Months or More 07200504 Deck Drive Belt (48-in. -
Page 27: Troubleshooting
TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Engine will not 1. Safety Interlock System is 1. The engine will not start unless the shift lever is in start preventing start. neutral, the key is in the On position, and the Power Take Off (PTO) is Off. 2. -
Page 28: Specifications
SPECIFICATIONS Model Number 988410 988411 988412 Model EGWKA1332S EGWKA1336S EGWKA1548S Engine Engine Kawasaki Engine Model Number FH381V FH381V FH430V Governed RPM (May be different 3600 ± 100 from maximum RPM) Cooling Capacity Air Cooled Speed Forward Maximum – mph (km/h) 5.4 (8.7) Reverse Maximum –... -
Page 30: Warranty
Genuine EverRide brand service parts and accessories are warranted to be free from defects in material and workman- ship for a period of 90 days after the date of purchase. An authorized EverRide dealer will repair or replace any such part or accessory free of charge, except for labor, during that period. - Page 31 • Mufflers, belts and tires on EverRide commercial lawn and garden products are not covered by this warranty. • Any misuse, alteration, improper assembly, improper adjustment, neglect, or accident which requires repair is not covered by this warranty.
- Page 32 EverRide An Ariens Company 655 West Ryan Street Brillion, WI 54110-1072 920-756-2141 Fax 920-756-2407 www.everride.com...
Need help?
Do you have a question about the WASP EGWKA1332S and is the answer not in the manual?
Questions and answers