Motorola MC67 Quick Start Manual page 2

BATTERY REMOVAL COMMUNICATION
Install Synchronization Software
1. If the MC67 is in suspend mode, press the Power button to wake the MC67.
2. Press the Power button to place the MC67 in suspend mode. ®
Download Mircosoft ActiveSync
3. Tap Safe Battery Swap. Center (Windows 7) from http://www.microsoft.com and follow the instructions to
4. Wait for the Data Capture LED to turn red and then turn off.
install onto the host computer.
5. When the LED turns off, remove the handstrap.
6. Slide the battery latch to the right. The battery ejects slightly. Communicate with Host
7. Grasp the battery and lift from the MC67.
Motorola Solutions, Inc.
1301 E. Elgonquin Rd. Schaumburg, IL 60196-1078, U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2012 Motorola Solutions, Inc. All Rights Reserved.
Create a Partnership
72-161172-01 Rev. A — May 2012
Follow the on-screen instructions to establish a connection between the MC67 and
the host computer.
MC67 QUICK START GUIDE
http://www.motorolasolutions.com/MC67
ACCESSORIES
Screen Protector
® ®
(Windows XP) or Windows Mobile Device
Motorola Solutions recommends the continued use of a screen
protector to minimize wear and tear. Screen protectors enhance
the usability and durability of touch screen displays.
Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device's screen looking like new
• Quick and easy installation.
Not using a screen protector can affect your warranty coverage.
An initial screen protector is already applied to your MC67.
Contact your local account manager or Motorola Solutions, Inc.
for more information and purchasing details.
Part number: KT-67525-01R Screen Protector 3/pk.
Four-slot Charge Only Cradle
Four-slot Ethernet Cradle
DATA CAPTURE OPTIONS
Four-slot Battery Charger Charge Only Cable USB/Charge Cable Imaging
Magnetic Stripe Reader Single-slot USB Cradle Vehicle Cradle
Trigger Handle Auto Charge Cable Vehicle Holder
Camera Decode
1. Launch a bar code reading application or
use DataWedge.
2. Point the MC67 at the bar code.
3. Press the Scan button.
4. In the image window align the red target
1. Launch a bar code reading application or use DataWedge. over the bar code. When the MC67 decodes
2. Point the exit window at the bar code. the bar code the Scan/Decode LED light
green and a beep sounds.
3. Press and hold the Scan button.
5. Release the Scan button.
4. The red laser aiming pattern turn on to assit in aiming.
When the MC67 decodes the bar code the Scan/Decode Camera Photo
LED light green and a beep sounds.
5. Release the Scan button.
1. Tap Start > Pictures & Videos > Camera.
2. Point the MC67 at an object.
3. Press the Enter key.
4. Hold MC67 still until "Shutter Sound" is heard.
GPS Information
When using the GPS feature of the MC67:
• Acquiring satellite signals may take a few minutes. It is best to be outside and
have a clear, unobstructed view of the sky.
• Without a clear view, acquisition takes much longer and could result in the MC67
being unable to compute the initial position quickly.
• Obtain a satellite fix before moving.
• Shutdown GPS application when not in use.
AVOID EXTREME WRIST ANGLES
AVOID EXTREME
WRIST ANGLES