Table of Contents
Advertisement
Menu system
In Standby mode
Manual Clock Adjustment
1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or
[¢].
4
Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display
Setting
"DSI ON"
LED flashes.
"DSI OFF"
LED OFF.
In Standby mode
Selectable Illumination
Selecting the button illumination color as green
or red.
Display
Setting
"KEY GRN"
The illumination color is green.
"KEY RED"
The illumination color is red.
28
|
English
Display Illumination Control
This function turns off the display when you
perform no operation for 5 seconds. This function
is effective when you are driving at night.
Display
Setting
"DISP ON"
Keeps the display on.
Turns off the display when you perform no
"DISP OFF"
operation for 5 seconds.
• When the display is off, pressing any key will turn on
the display.
• When the display is off, you cannot perform any
operation except for the following:
• Volume
• Attenuator
• Selecting the source
• Ejecting the disc
• Turning off the power
• During function control, such as the Menu System, the
display stays on.
In Standby mode
Dimmer
Dimming this unit's display automatically when
the vehicle light switch is turned ON.
Display
Setting
"DIM ON"
The display dims.
"DIM OFF"
The display doesn't dim.
Advertisement
Table of Contents
