Eltek Valere UNV-F 2.5 User Manual page 2

DC/AC Inverter
UNV-F
User Manual
Page 2 (28)
Notes to this manual
ATTENTION! Read this manual very carefully before installing and commissioning the specified module.
This manual is a part of the delivered module. Familiarity with the contents of this manual is required for
installing and operating the specified module.
The rules for prevention of accidents for the specific country and the general safety rules in accordance with
IEC 364 must be observed.
The function description in this manual corresponds to the date of publishing.
Technical changes and changes in form and content can be made at any time by the manufacturer without
notice. There are no obligations to update the manual continually.
The module is manufactured in accordance with applicable DIN and VDE standards such as VDE 0106 (part 100)
and VDE 0100 (part 410). The CE marking on the module confirms compliance with EU standards 2006-95-EG
(low voltage) and 2004-108-EG (electromagnetic compatibility) if the installation and operation instructions are
followed.
Supplier:

ELTEK VALERE DEUTSCHLAND GmbH
GB Industrial
Schillerstraße 16
D-32052 Herford

+ 49 (0) 5221 1708-210
FAX + 49 (0) 5221 1708-222
Email Info.industrial@eltekvalere.com
Internet http://www.eltekvalere.com
2009. ELTEK VALERE DEUTSCHLAND GmbH. All rights reserved.
©2009. ELTEK VALERE DEUTSCHLAND GmbH. UM_UNVF_ E_R2.0